Make and Model

Hydrostatic core holder with syringe pump
SSPV-250-8000CSP (Syringe pump)

Specifications

• Confining pressure : Upto 6000 psi
• Temperature control range : 0°C - 150°C
• Flow capacity : 0.03-30 mL/min

Make and Model

Multi-electrode georesistivity meter, MAE-X612EM+

Specifications

• 48 embedded channel

• Four multi-pairs cable (12 takeouts, 120 m length) to connect electrodes to X612EM+

• 48 electrodes and connecting cables

• Maximum spread length = 480 m

• Depth of investigation = 96 to 160m

Make and Model

GSSI-Monostatic - 400 MHz – 50400S
GSSI-Bistatic 16-80 MHz Antenna-3200 MLF

Specifications

• 400 MHz ground coupled antenna

• Depth  of penetration : 2-10 m

• 16-80 MHz adjustable low frequency antenna

• Depth  of penetration : 30-50 m

Make and Model

CKiC, 5E-HA60X50

Specifications

• As per the BIS and ASTM Standard

Make and Model

Leica, MSP-200

Specifications

• Advanced petrological microscope equipped with fluorometry

Make and Model

Leica, MSP-200

Specifications

• Advanced petrological microscope equipped with fluorometry

Make and Model

Leica, MSP-200

Specifications

• Advanced petrological microscope equipped with fluorometry

Make and Model

Multi-channel  Seismic system - PASI-GEA 24
RGIPT Make - Weight-drop Seismic energy source

Specifications

• 24 channel seismograph with a 24-bit data acquisition board and USB interface for external PC
• 24 vertical (4.5 and 10 Hz) and horizontal (10 Hz) geophones
• Two seismic cable (12 takeouts)
• Maximum spread length = 240 m
• Two trigger cable
• 10 Kg sledgehammer
• Highly repeatable source, Weight drop mass: 55 Kg

Make and Model

Struers, Labo Force-100

Specifications

• System grinding and polishing of coal and dispersed organic matter

Make and Model

LeCO, TGA801

Specifications

• Analysis done as per the BIS and ASTM Standard

Make and Model

USA 2019, CTE-2000-5

Specifications

• CTE model 2000-5 uCa can test cement slurries at temperatures up to 400°F/204°C and pressures as high as 5,000 psig/34.5 mpa. the slurry sample to be tested is prepared in accordance with api recommended practices and then placed in a temperature and pressure-controlled autoclave unit (cell)