Make and Model

Rancimat Metrohm, 893

Specifications

• Heating: Two individually heated aluminium heating blocks
• Max. number of samples: Eight (four in each block)
• Temperature range: 50 - 220 °C, can be set in steps of 1 °C
• Temperature correction: -9.9 - +9.9 °C, can be set in steps of 0.1 °C
• Max. deviation from the set temperature: ±0.3 °C
• Reproducibility of the set temperature: Typically, better than ±0.2 °C
• Temperature fluctuations: Typically, <0.1 °C
• Temperature differential between the individual measuring positions: Typically, <0.3 °C
• Response temperature of the overheating protection: 260 °C
• Gas supply: Built-in membrane pump
• Gas flow range: 1 - 25 L/h
• Conductivity measurement: 0 - 400 µS/cm

Make and Model

Elementar, UNICUBE

Specifications

• Fully automatic computer controlled
• Sample Size: 0.1 to 500 mg
• Furnace/Combustion Temperature; 1100 0C
• Analysis range: 0.01-100 % for Elements (C, H, N, S)

Make and Model

WTW Thermoreactor CR 3200

Specifications

• Determination of COD, total nitrogen and total phosphorus 
• Thermal reactor for COD and thermal digestion, up to 24 cuvettes using a program settings
• 8 fixed and 8 adjustable programs with free choice of temperature up to 170 ° C, 115/230V
• 8 easily selectable digestion programs

Make and Model

KRUSS DFA 100

Specifications

• 5 bar pressure
• Gas flowrate (internal, Air) 0.2 - 1.0 L/min
• Gas Flowrate (external, N₂, CO₂) 0.05 -1.0 L/min

Make and Model

TA, DMA Q800

Specifications

• Air Pressure Range 60-65 PSI

• Temperature: Low to High

Make and Model

E-SPIN Nanotech Endowing Nano
Super – ES-2 

Specifications

Make and Model

FANN Instrument, 212 EP

Specifications

• The motor runs at 90 VDC maximum. Its speed is directly variable by voltage with a maximum of 1800 RPM. The speed is reduced at the V-belt sheaves by a factor of 1:1.6.
• The analog meter displays RPM or torque as selected by the toggle switch.
• Magnetic Speed Pickup Sensor
• Prony Brake

Make and Model

SETARAM (France, D6350

Specifications

• PCT (Pressure Composition Isotherms), Gas Sorption Kinetics, Heat-of-Formation, Cycle-Life Kinetics, Cycle-Life PCT, and Volume Calibration
• Pressure Regulator: Internal PID controlled pressure regulator that operates up to 200 bar
• Gas Sorption: Can perform adsorption/absorption on Argon, Carbon Dioxide, Hydrogen, Nitrogen, Helium, Methane
• Temperature range: upto 450℃
• Gas Handling: All valves and the pressure regulator are pneumatically controlled

Make and Model

Thermo Fisher Scientific, iCAP Pro X Duo

Specifications

• RF generator 27.12 MHz with solid state, 1000-1400 W Power
• Plasma with dual viewing optics
• High Performance Solid Sate Charged Coupled
• Wavelength 170-780 nm

Make and Model

Anton Paar, MCR302e

Specifications

• IRS Interfacial Rheological Cell
• P-PTD200/80/I/AIR
• Peltier Temperature Control Device
• Temperature range: 0 to 200° C
• Integrated fan for counter cooling
• Measuring Cone BI-C68-5
• D: 68.28 mm, Angle 5°

Make and Model

Crystallization Monitoring Sensor
CrystalEYES

Specifications

• Probe diameter 5 mm
• Probe length ~2 mL to a bench-scale 5 L
• Integrated data logging option
• Optimum temperature 200 °C
• Working pressure 10 bar at 25 °C
• Steam sterilizable up to 200 ⁰C and autoclavable
• Intelligent software control

Make and Model

Rancimat Metrohm, 893

Specifications

• Force Capacity - 25KN
• Minimum Test Speed – 0.001mm/min
• Maximum Test Speed – 1000 mm/min
• Maximum Crosshead return Speed – 0.001 mm/min to 1000 mm/min
• Jog Speed - 0.001 mm/min to 1000 mm/min
• Vertic Test Space /Crosshead Travel - 1100 mm
• Horizontal Test Space between Columns – 405 mm
• Load Accuracy - +/- 0.5% of indicated load from 2% to 100% capacity, extended range down to 1% capacity with accuracy of 1% of indicated load
• Position Accuracy - +/-0.01% of reading or 0.001 mm, whichever is greater
• Speed Accuracy (% of full speed) - +/- 0.005% of set speed