Education

Experience

International conference attended (In-person mode):

• Attended 22nd International Conference on Advances in Materials and Processing Technology (AMPT- 2019), Oct. 20-24, 2019, Taipei, Taiwan. (Funded by IIT Ropar).
• Attended 55th CIRP Conference on Manufacturing Systems-2022. (Held in Switzerland on 29th June-1st July 2022). (Funded by SERB under International Travel Support Scheme, Department of Science and Technology, Government of India).
• Attended 24th International Conference on Wear of Materials. (Held in Banff, Alberta, Canada, 16-20 April 2023). (Funded partially by Tennessee Technological University, Cookeville, Tennessee, USA-38501).

Journal Publications

1. K. S. Sandhu, H. Kishore, A Sidana “Optimization of FSW input parameters for dissimilar butt-welded joints of Al6061-AZ31 alloys by GRA” Journal of Adhesion Science and Technology, 2025. https://doi.org/10.1080/01694243.2025.2459716.
2. N. Chaudhary, S. Singh, M. Garg, H. Kishore, S. Sharma, S. P. Dwivedi, M. Abbas, “Implications of Prolonged Sub-Zero Environmental Conditioning and temperature cooling on the Microstructural Morphological, and Mechanical Properties of SiC Reinforced Al6061-T6 Friction Stir Spot Welded joints”, Journal of Material Research and Technology, 2024. 29, 4359-4372. https://doi.org/10.1016/j.jmrt.2024.02.013.
3. H. Kishore, M. Pal., C.K. Nirala, A. Agrawal, 2023, “Thermal Performance Evaluation of Unconventional Micro Pin-fin Heat Exchangers- Part I: Geometrical Design Parameters Optimization”, Int. J. of Preci. Engg. Manuf., Springer, 2023. https://doi.org/10.1007/s12541-023-
4. 00925-1.
5. H. Kishore, M. Pal., C.K. Nirala, A. Agrawal, 2023, “Thermal Performance Evaluation of Unconventional Micro Pin-fin Heat Exchangers- Part II: Numerical Simulation and Fabrication Demonstration”, Int. J. of Preci. Engg. Manuf., Springer, 2023. https://doi.org/10.1007/s12541-023-00926-0.
6. Kishore, H., Pal, M., Nirala, C. K., Agrawal, A. (October, 2023). Thermal Performance Evaluation of Unconventional Micro Pin-fin Heat Exchangers - Part I: Geometrical Design Parameters Optimization. International Journal of Precision Engineering and Manufacturing, 25, 245-254. https://doi.org/10.1007/s12541-023-00925-1.
7. Kishore, H., Pal, M., Nirala, C. K., Agrawal, A. (October, 2023). Thermal Performance Evaluation
8. of Unconventional Micro Pin-fin Heat Exchangers - Part II: Numerical Simulation and Fabrication Demonstration. International Journal of Precision Engineering and Manufacturing, 25, 255-269. https://doi.org/10.1007/s12541-023-00926-0.
9. K. S. Sandhu, H. Singh, G. Singh, H. Kishore, “Performance evaluation of additive TiO2, MWCNT and GNP reinforced particles on Mg AZ31 based matrix composites by Friction Stir Processing”, J. of Adh. Sci. Tchnol. Taylor and Francis. 2023. https://doi.org/10.1080/01694243.2023.2241252.
10. H. Kishore, C.K. Nirala, A. Agrawal, 2023, “Thermal Performance Index based Characterization and Experimental Validation for Heat Dissipation by Unconventional Arrayed Micro Pin-fins”, J. of Thermal Sci. Engg. Progres., Elsevier, 2023. 45; 102015 (1-13). https://doi.org/10.1016/j.tsep.2023.102015.
11. H. Kishore, C.K. Nirala, A. Agrawal, “Exploring AZ31B Magnesium Alloy for Innovative Micro Products by Reverse μEDM”, Mat. Letters, Elsevier. 328, 2022. 133109 (1-4) https://doi.org/10.1016/j.matlet.2022.133109.
12. J. Airao, H. Kishore, and C. K. Nirala, “Measurement and analysis of tool wear and surface quality in micro turning of SLM Ti6Al4V and wrought Ti6Al4V”, J. of Measurement, Elsevier (206); 2023. 112281. https://doi.org/10.1016/j.measurement.2022.112281.
13. J. Airao, H. Kishore, and C. K. Nirala, “Comparative analysis of tool wear in micro milling of wrought and selective laser melted Ti6al4V”, J. of Wear, Elsevier (523); 2023. 204788. https://doi.org/10.1016/j.wear.2023.204788.
14. S. Raza, H. Kishore, C. K. Nirala, and K.P. Rajurkar, “Multiphysics Modeling and High-Speed Imaging based Validation of Discharge Plasma in Micro-EDM”, CIRP J. Manuf. Sci. and Technol. (43); (Elsevier, 2023). 15-29. https://doi.org/10.1016/j.cirpj.2023.02.006.
15. H. Kishore, C.K. Nirala, A. Agrawal, “Laser Micromachining in Fabrication of Reverse-μEDM Tools for Producing Arrayed Protrusions”, J. of Micromachines (Basel). MDPI. 2022;13(2):306. https://doi:10.3390/mi13020306.
16. H. Kishore, C.K. Nirala, A. Agrawal, Basil Kuriachen, “Assessment of process parameters and performance enhancement through a novel suction flushing technology in RμEDM”, J. of Mater. And Manuf. Process. Taylor and Francis. 2021; 36(13): 1–13, https://doi.org/10.1080/10426914.2021.1948051.
17. H. Kishore, R. Nadda, C.K. Nirala, A. Agrawal, “Modelling and Simulation Based Surface Characterization of Reverse-μEDM Fabricated Micro Pin-fins”, J. of Procedia CIRP, vol. 81, pp. 1230-1235, (Elsevier, 2019), https://doi.org/10.1016/j.procir.2019.03.299.
18. H. Kishore, C.K. Nirala, A. Agrawal, “Feasibility Demonstration of μEDM for Fabrication of Arrayed Micro Pin-fins of Complex Cross-sections”, J. of Manuf. Letters, vol.23, pp.14-18, (Elsevier, 2020). https://doi.org/10.1016/j.mfglet.2019.11.005.
19. J. Airao, H. Kishore, and C. K. Nirala, "Tool Wear Behavior in μ-Turning of Nimonic 90 Under Vegetable Oil-Based Cutting Fluid." ASME. J. Micro & Nano-Manuf. December 2021; 9(4): 041003. https://doi.org/10.1115/1.4053315.
20. H. Kishore, R.K. Saxena, “Experimental and Numerical Method to Predict the Micro-hardness of SS316”, International Journal of Engineering Technology Science and Research (IJETSR), ISSN 2394 – 3386 Volume 4, Issue 5, 2017, pp.211-224, ISBN: 978-81-934083-0-8.
21. Chang Jong Kim, Bo Wook Seo, Hwi Jun Son, Seok Kim, Duckbong Kim, Young Tae Cho, Slag inclusion-free flux cored wire arc directed energy deposition process, Materials & Design, 238, 2024, 112669, https://doi.org/10.1016/j.matdes.2024.112669. [Acknowledgement for carrying out characterization of welded samples]
22. S. Pratap, P. Kumar, H. Kishore, S. Datta, A.B. Huluka, "Predictive Modeling and Optimization of Surface Roughness in Reverse- μEDM fabricated Microeletrode Arrays Using ML Models" Scientific Reports, Springer. 2025. (Accepted) https://doi.org/10.1038/s41598-025-13269-9.
23. Syed Hammad Mian; Chandrakant K Nirala, Ravi Kant; Usama Umer; H. Kishore. (October 2025). Numerical Evaluation of Roughness Effect on the Thermal Performance of the Schwarz-P-based TPMS Heat Sink., IEEE Access, https://doi.org/10.1109/ACCESS.2025.3627964. [I.F.- 3.6]. [2169- 3536] Q1
24. Brijesh Kumar Singh, Hreetabh Kishore, Sajan Kapil, and Shrikrishna N. Joshi “Thermo-physical Modeling and Intelligent Learning Based Topographical Characterization of micro-Dimples during Laser Pulsed Processing” J. of Intelligent Manufacturing, Springer. 2025. Manuscript ID: JIMS-D- 25-01737, (Submitted).
25. H. Kishore, A. Singh, S. Ahmed, C. K. Nirala, and H. Singh, “Exploration of Reverse-μEDM capability towards innovative fabrication of micro-grooves on a pinless FSP tool”, Nanotechnology and Precision Engineering, AIP Publishing. 2025. Manuscript ID: #NPE25-AR-00186.
26. A. Singh, H. Kishore, S. Ahmed, C. K. Nirala, and H. Singh, “Effect of Friction Stir Processing (FSP) with Triple-spiral-grooved Pinless Tool on Surface Integrity of Cold-sprayed Inconel 718”, J of Material Engineering and Performance, Springer. 2025. Manuscript ID: MANU-D- JMEP-25-02-40865, (Under review).
27. K. S. Sandhu, H. Singh, G. Singh, H. Kishore. (April 2024). Influence of sub-zero coolant circulation and additive nanoparticles on performance characteristics of FSPed Al6061 alloy, Materials Today Communications. MTCOMM-D-24-03875.
28. P. Sinha, H. Kishore. Mapping the research trends on the post-processing assessment of additively manufactured structures during (2013-2025): A scientometric analysis, Advances in Manufacturing, Springer. 2025. Manuscript ID: MANU-D-23-00784 (Submitted).

Conferences Publication

1. Pratap, S., Kumar, P, Kishore, H. Datta, S. “Advancement in needle fabrication: From precision engineering to scalable solutions”. 2025. IMECE India 2025, ASME conference. Submission no. 161030. (Accepted for publication). 10-13th September 2025.
2. Kishore, H., Singh, M., Nirala, C. K., Agrawal, A. “Aerodynamic Performance of Arrayed Piranha
3. Micro Pin-fin Heat Sinks: Thermal characterization and Fabrication feasibility Demonstration”. 2024, International Manufacturing Science & Engineering Conference (MSEC-2024) and the 52nd North American Manufacturing Research Conference (NAMRC), To be held on June 17-21st, 2024, UTK, Knoxville, Tennessee. Submission No: 130315.
4. J. Airao, H. Kishore, and C. K. Nirala, “Comparative analysis of tool wear in micro milling of wrought and selective laser melted Ti6Al4V” 24th Conference on wear of materials” (published in Wear Journal), 16-20th April, 2023.
5. Sohaib Raza, Hreetabh Kishore, Chandrakant Kumar Nirala, “Simulation of crater formation during μEDM using the ALE method” 5th World congress on micro and nano manufacturing, Proceedings of WCMNM-22, Paper ID-56, KU LEUVEN, Belgium, (19th -22th September, 2022)
6. Sohaib Raza, Hreetabh Kishore, Chandrakant Kumar Nirala, “Simulation and Experimental Study of Plasma Channel Formation in Micro EDM for Magnesium AZ31B alloy”, 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes-2022. Chalmers University of Technology, Sweden. (25th-27th October 2022)
7. Shuja Ahmed, Arjun Singh, Hreetabh Kishore, Damish Qamar, Chandrakant Kumar Nirala, Harpreet Singh “Fabrication of shoulder surface features on tungsten carbide made FSP tool through EDM process- A feasibility study”, 9th International Conference on “Advancements and Futuristic Trends in Mechanical and Materials Engineering” (AFTMME-2021), IIT Ropar, Rupnagar, India. 9th -11th December 2021)
8. Harish K Nirala, Hreetabh Kishore, Anupam Agrawal, “Effect of Nd- YAG LBμM process parameters on the surface characterization of fabricated micro components”, 20th ISME (Advancement in Mechanical Engineering) conference held at IIT Ropar, 19th-21st May, 2022. (Presenter: Hreetabh Kishore and Dr. Harish K Nirala)
9. Mainak Pal, Hreetabh Kishore, Anupam Agrawal, Chandrakant K Nirala, “Fabrication of Precise Hemispherical End Tool for Micro Incremental Sheet Forming using Reverse-μEDM”, 55th CIRP Conference on Manufacturing Systems-2022. J. of Procedia CIRP, Vol. 107, pp. 1600-1605 (SUPSI, Lugano, Switzerland from 29 June – 01 July, Elsevier, 2022), https://doi.org/10.1016/j.procir.2022.06.001.
10. H. Kishore, R. Nadda, C.K. Nirala, A. Agrawal, “Modelling and Simulation Based Surface Characterization of Reverse-μEDM Fabricated Micro Pin-fins”, 52nd CIRP Conference on Manufacturing Systems-2019. J. of Procedia CIRP, vol. 81, pp. 1230-1235, (Ljubljana, Slovenia, from June 12-14, Elsevier, 2019), https://doi.org/10.1016/j.procir.2019.03.299.
11. Hreetabh Kishore, Vikrant Sharma, Jay Airao, Chandrakant K Nirala, Anupam Agrawal, 2021, “Introduction of a New Suction based Dielectric Flushing in Reverse-μEDM”, Proceedings of WCMNM-21, Paper ID-35, IIT Bombay (21-23 September 2021, Presented online). (Awarded student Award with fee exemption)
12. Hreetabh Kishore, Mainak Banerjee, Saurabh Rai, Rakesh Kumar, Anupam Agrawal, 2020, “Experimental and Numerical Investigation on Micro Friction Stir Welding of Dissimilar Metal Joints”, Proceedings of the ASME 2020 15th International Manufacturing Science and Engineering Conference, MSEC-2020. Paper ID- MSEC2020-8525, MSEC2020-8525, V002T06A015; 8 pages, June 21-25, 2020, https://doi.org/10.1115/MSEC2020-8525.
13. Hreetabh Kishore, C.K. Nirala, A. Agrawal, 2019, “Characterization of LBM Fabricated Tool-plate for RμEDM”, 7th International conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME 2019), IIT Ropar, 5-7th December 2019.
14. Hreetabh Kishore, Chandrakant Kumar Nirala, Anupam Agrawal, “Unconventional Shaped Micro Pin-fins for Electronic Cooling: A New Fabrication Approach,” 22nd International Conference on Advances in Materials and Processing Technology (AMPT- 2019), Oct. 20-24, 2019, Taipei, Taiwan. (Presenter: Hreetabh Kishore)
15. Mainak Pal, Peeyush Mahajan, Nihal Athikkai, Saurabh Rai, Hreetabh Kishore, Rakesh Kumar, Anupam Agrawal, “Development of GUI and Comparison of Tool path Strategies for IncrementalForming of Polycarbonate Sheet.” (COPEN-2019, IIT, Indore, December 12-14, 2019).
16. Hreetabh, Nirala C.K., Agrawal A. (2019) A New Approach for Fabrication of Complex-Shaped Arrayed Micro Electrodes. In: Shunmugam M., Kanthababu M. (eds) Advances in Micro and Nano Manufacturing and Surface Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9425-7_3.
17. Rai S., Kishore H., Kumar Nirala H., Agrawal A. (2020) Finite Element Analysis of Sheet Thickness and Force Variation in AA6063 During Single Point Incremental Forming. In: Shunmugam M., Kanthababu M. (eds) Advances in Simulation, Product Design and Development. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9487-5_13.
18. Hreetabh Kishore, Shoaib Raza, C.K. Nirala, A. Agrawal, “Poster-I Hybrid μEDM-LASER Technology for Fabrication of Complex Shaped Arrayed Micro-structures” Poster II- “Process Development in μEDM using Hybrid Ultrasonic Vibration and Suction Technology” Participated and presented Poster at IESS-2019, Chennai Trade Center, Chennai, Tamilnadu, 14-16 March 2019.
19. “A New Technology for Fabrication of Arrayed Micro-pin-fins” presented Poster by (Dr. Chandrakant K Nirala) on March 17th, 2018, at Titan Technology Tune-In, Hosur Titan watches factory. – Address, No.3 SIPCOT Industrial Complex, Hosur, Banglore city, Registration ID- 20143818.
20. Hreetabh Kishore, C. K. Nirala, A. Agrawal, “Development of a New Technology for Fabrication of Complex Shaped Arrayed Micro-pin-fins” submitted and presented in Research Conclave at IIT Ropar on April 23rd, 2018.
21. H. Kishore, R.K. Saxena, “Experimental and Numerical Method to Predict the Micro-hardness of SS316”, International Conference on New Frontiers of Engineering, Science, Management and Humanities (ICNFESMH-2017), NITTTR, Chandigarh, Paper Id-NITTTR-936.

Books and Book Chapters

1. Ankit D. Oza, Hreetabh Kishore, Ankit Sharma, Atul Babbar, Editors of Book “Artificial Intelligence and Robotics in Manufacturing: A Sustainable Future”. ISBN 9781032827841 206 Pages 62 B/W Illustrations December 10, 2025 by CRC Press.
2. Keyur Patel, Ankit Oza, Ankit Sharma, Archana Mantri. Hreetabh Kishore, Editors of Book “Smart Manufacturing with IoT: Signal Processing, Computer Vision & Data Analytics/ 9781032827896”, CRC Press LLC, 17 Dec 2025 – ISBN - 9781003506478, Technology & Engineering - 174 pages, https://doi.org/10.1201/9781003506478.
3. Kishore, H., Nirala, C. K., Agrawal, A. (2019). A New Approach for Fabrication of Complex-Shaped Arrayed Micro Electrodes. In: Shunmugam M., Kanthababu M. (eds) Advances in Micro and Nano Manufacturing and Surface Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9425-7_3. ISBN- 978-981-19-4570-0.
4. Rai S., C. K., Kishore, H., Agrawal, A. (2020). Finite Element Analysis of Sheet Thickness and Force Variation in AA6063 During Single Point Incremental Forming. In: Shunmugam M., Kanthababu M.(eds) Advances in Simulation, Product Design and Development. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-32-9487-5_13. ISBN- 978-981-32-9486-8.
5. Kishore, H., Sinha, P. (2024). AI-Based Scientometric Analysis of Post-Processing in Additively Manufactured Structure: Insights from 2013–2023 "Artificial Intelligence and Robotics in Manufacturing: A Sustainable Future" CRC Press, Taylor and Francis Group. (Published)

Patents

1. Indian Patent Application No: 202211036538
   Date of filing: 25/06/2022
   Title: ‘A dielectric flushing system for Reverse-micro-electric discharge machining and method of flushing thereof’
   Applicant: Indian Institute of Technology Ropar
   Inventors: Hreetabh Kishore, Chandrakant K Nirala, & Anupam Agrawal
   Status: Under Examination
2. Indian Patent Application No: 202411005741
   Date of Filing: 29/01/2024
   Title: ‘A multi-purpose test rig for thermal performance evaluation of thin wall metallic structures’
   Applicant: Indian Institute of Technology Ropar
   Inventors: Hreetabh Kishore, Chandrakant K Nirala, &; Anupam Agrawal
   Status: Under Examination
3. Indian Patent (Copyright) Diary No: 22538/2023-CO/L
   Registration Receipt No: L134630/2023
   Date of filing: 23/08/2023
   Date of Granted: 10/10/2023
   Title: ‘Novel framework for virtual library tour based on IoT Technology’
   Inventors: Priyanka Sinha, Hreetabh Kishore, Abhishek Sinha, & Khushpreet Singh Brar
   Status: Granted
4. UK Design Patent Application No: 6333988
   Date of filing: 12/19/2023
   Title: ‘Design and development of spiral channel-based fixture for controlled cooling in deformable friction stir processing’
   Applicant: Punjabi University
   Inventors: Kulbir Singh Sandhu, Gurpreet Singh, Hazoor Singh, Hreetabh Kishore
   Status: Granted
5. Indian Patent (Copyright) Diary No: LD-35560/2025-CO
   Registration Receipt No: 199505
   Date of filing: 04/09/2025
   Date of Granted: Awaiting
   Title: ‘Development of analytical model for predicting deformation behavior of multi-material gaskets with embossments’
   Applicant: Self
   Inventors: Saurabh Rai, Hreetabh Kishore
   Status: Filed

• Departmental Faculty Coordinator, Training and Placement, RGIPT, Jais
• Faculty Adviser and Editor, “Vinirmaan” – Half Yearly Newsletter, RGIPT, Jais
• Faculty Coordinator/Lab-In-charge: CAD & CAM Lab

• Reviewer of Journal of Welding International (Springer).
• Reviewer of Journal of Scientific Reports (Springer).
• Reviewer of Journal of Progress in Additive Manufacturing. (Springer)
• Reviewer of Journal of Thermal Science and Engineering Applications. (ASME)
• Reviewer of Journal of Adhesion Science and Technology. (Taylor and Francis)
• Reviewer of Journal of International Journal on Interactive Design and Manufacturing. (Springer)
• Reviewer of Journal of Advances in Manufacturing. (Springer)
• Reviewer of Journal of Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. (Sage Journals)
• Reviewer of Journal of High Temperature Materials and Processes. (De Gruyter)
• Reviewer of Journal of Case Study in Construction Materials. (Elsevier)
• Reviewer of UKRI Research Funding, UK Research and innovation.
• Organizing committee member “MAKE-A-THON”-2025 at Rajiv Gandhi Institute of Petroleum Technology
• Worked as Volunteer in India International Science Festival (IISF-2024) held between 30th November-3rd December at IIT Guwahati).
• Worked as Student Coordinator for ISME-2022 conference. (Held between 19-21th May at IIT Ropar).
• Awarded GOLD MEDAL (Academics) in Diploma in Foundry Technology.
• Awarded BRONZE MEDAL (Academics) in M.Tech. in Welding and Fabrication.
• Worked as Student Coordinator for AFTMME-2021 conference. (Held between 9-11th December at IIT Ropar).
• Worked as Student Coordinator for 15th IEEE ICIIS-2020 conference. (Held between 27-28th November at IIT Ropar).
• Editor of quarterly “Sangam Patrika” at IIT Ropar 2019-2023.
• Got Student Award for Outstanding Research Presentation in WCMNM-2021 (IIT Bombay).
• Won various National and Institute level prizes at IIT Ropar.
• Worked as Departmental Representative (PhD) at IIT Ropar
• Organized METRIX-3.0 (Inter IIT Research Idea Exchange Workshop in the Department of Mechanical Engineering at IIT Ropar.
• Awarded First Prize (METRIX-3.0) Research Talk Presentation. (21st-22nd October 2021)
• Coordinated various departmental STTP, Workshops etc. and Science Day at SLIET, Longowal.
• Member of SLIET Mechanical Engineering Society.
• Nominated for prestigious Newton-Bhabha Fund PhD Placement Programme.
• Actively participated in various sports activities at college and inter school level.
• Won Second Prize in Paper Presentation “Go-Green” in Techfest 2013 at SLIET Longowal.
• Won 3rd Prize in working Model of welding jobs Fixtures in Techfest 2014 at SLIET Longowal.
• Worked as chief coordinator of RAJBHASHA HINDI VIKAS SAMITI (2012-2014).
• Worked as Student Chairman Indian Society for Technical Education committee.
• Overall Student Coordinator in Techfest 2015 at SLIET Longowal.
• Worked as a secretary (Motivation Committee) during SLIET TECHFEST-2013.
• Worked as chief editor of Hindi Patrika “PRAUDYOGIKI BHARTEE”-2014 (SLIET, Longowal).
• Worked as Executive member of NATIONAL SERVICE SCHEME Committee (SLIET, Longowal).
• Worked as Student Volunteer for 15th IEEE ICIIS-2020 Workshop on “Computer Vision with Deep Learning”. (Held between 27-28th November at IIT Ropar).
• Student Editor of quarterly “Sangam Patrika” Magazine by Hindi Cell, IIT Ropar (2019-2023).
• Awarded First Consolation Prize in Hindi Song Competition on the occasion of “75th Independence Day” at IIT Ropar, Organized by Hindi Cell on 12th February 2021.
• Awarded Second Prize in Speech Competition on the occasion of “Matribhasha Diwas” at IIT Ropar, Organized by Hindi Cell on 21st February 2021.
• Awarded Second Consolation Prize in Hindi Quiz Competition on the occasion of “Hindi Pakhwara” at IIT Ropar, Organized by Hindi Cell from 14th -28th September 2020.
• Awarded Second Prize in Hindi Essay Competition on the occasion of “Hindi Pakhwara” at IIT Ropar, Organized by Hindi Cell from 14th -28th September 2020.
• Awarded Second Prize in Hindi Essay Competition on the occasion of “Hindi Pakhwara” at IIT Ropar, Organized by Hindi Cell, 14th-28th September 2021.
• Awarded Second Consolation Prize in Hindi Quiz Competition on the occasion of “Hindi Pakhwara” at IIT Ropar, Organized by Hindi Cell, 14th -28th September 2021.
• Organized METRIX-3.0 (Inter IIT Research Idea Exchange Workshop in the Department of Mechanical Engineering at IIT Ropar).
• Honored to contribute Article on “????????? ????????? ?? ????? ????????” for ????? ??????? “???????” ????? ??? - ??? ??????? ??????????? ?????, ??????, ?????? (?? ????- ??. ????? ???????)
• Worked as Student Volunteer for “IIT ROPAR RUN” to promote health, wellness, and fitness on the auspicious day of Gandhi Jayanti (2nd October 2022) under the “Fit India Movement” by the Govt. of India.
• Worked as Student Volunteer for “IIT ROPAR RUN” to promote health, wellness, and fitness on the auspicious day of Gandhi Jayanti. (2nd October 2019).