| Abhilasha |
21PE1001 |
Dr Shivanjali Sharma |
Petroleum Engineering |
2023 |
Performance Evaluation of Novel Tetra Polymer as an Additive for Low-Solids Drilling Fluids |
| Deepak Kumar Prajapati |
21PE1002 |
Dr Shivanjali Sharma |
Petroleum Engineering |
2023 |
Microwave-assisted Synthesis of Zinc Oxide Nanoflowers for Improving the Rheological and Filtration Performance of High-Temperature Water based Drilling Fluids |
| Jayant Kumar |
21PE1003 |
Dr Shailesh Kumar |
Petroleum Engineering |
2023 |
Evaluation of Zwitterionic Surfactant For Development of Heavy Crude Oil-in-Water Emulsion for Pipeline Transportation |
| Manish Kumar |
21PE1004 |
Dr Amit Kumar |
Petroleum Engineering |
2023 |
Experimental Investigation of Foam-Based Fluid for Application in Enhanced Oil Recovery |
| Manish Kumar |
21PE1005 |
Dr Alok Kumar Singh |
Petroleum Engineering |
2023 |
Coal characterization of Sohagpur Coalfield and their effect on CO2 Adsorption |
| Shivam Yadav |
21PE1006 |
Dr Amit Saxena |
Petroleum Engineering |
2023 |
Studies of Foam Stabilization using Nanoparticles for Oil Field Applications |
| Apoorv Tandon |
20PE1001 |
Dr Amit Saxena |
Petroleum Engineering |
2022 |
A Comparative Study of Monovalent & Divalent Salts for Low Salinity Water Flooding in Heterogeneous Sandstone Reservoirs |
| Pradeep Yadav |
20PE1008 |
Dr Vishnu C Nair |
Petroleum Engineering |
2022 |
Simulation of Semi-Synthetic Reservoir Model by 5 Spot Pattern through various forms of Oil Recovery Processes using CMG Software |
| Gaurav Kumar |
20CE1001 |
Dr V S Sistla |
Chemical Engineering |
2022 |
Separation of Para-Xylene from Para+ Ortho-Xylene Mixture using Membrane Assisted Crystallization |
| Ashim Debnath |
20PE1002 |
Dr Tushar Sharma |
Petroleum Engineering |
2022 |
Evaluation of Performance Spectra of Mono and Divalent Low Saline Brine Injection in Mixed Sandy Carbonate Reservoir |
| Ashwani Singh |
20PE1003 |
Dr Satish Kumar Sinha |
Petroleum Engineering |
2022 |
Carbon Dioxide Sorption Studies on Sayal and Gurha Coal Seams of Indian Coal Fields |
| S Dheenathayalan |
20PE1004 |
Dr Tushar Sharma |
Petroleum Engineering |
2022 |
Silica Nanofluid treated Cement Slurry of Improved Rheological Properties for CO2 Sequestration Well |
| Fahad Khan |
20PE1005 |
Dr Shivanjali Sharma |
Petroleum Engineering |
2022 |
Synthesis and Performance Evaluation of Nanomaterials based Cement Additives for Enhancing the Properties of Oil Well Cement Slurry |
| Govind Mittal |
20PE1006 |
Dr Shivanjali Sharma |
Petroleum Engineering |
2022 |
Experimental Investigation of Novel Fatty Oil-Based Lubricant via Lubricity Coefficient, Filtration Loss, and Rheological Characterization in Water-based Drilling Mud |
| Muntasir Mahmud |
20PE1007 |
Dr Vishnu C Nair |
Petroleum Engineering |
2022 |
A molecular Dynamics Approach towards the Development of Sulphate-based Smart Water for Calcite Reservoir |
| Prateek Choudhary |
20PE1009 |
Dr Satish Kumar Sinha |
Petroleum Engineering |
2022 |
Geological Modelling and Reservoir Simulation using the Seismic Data of Volve Field |
| Vishnu Roy |
20PE1011 |
Dr Amit Saxena |
Petroleum Engineering |
2022 |
Machine Learning and its Applications in the Oil Field |
| Jatin Gupta |
20CE1002 |
Dr M S Balathanigaimani and Mr Nandan Mishra |
Chemical Engineering |
2022 |
Smart Predictive Cleaning Schedule of Heat Exchangers in Crude Preheat Train in Refinery |
| Raman Shukla |
20CE1003 |
Dr Koushik G Biswas |
Chemical Engineering |
2022 |
Continuous Flow Reactor Mediated Synthesis of High-Grade Biodiesel from Waste Cooking Oil and Palm Oil using Nanomaterials |
| Rishabh Tripathi |
MPE19003 |
Dr Vishnu C Nair |
Petroleum Engineering and Geoengineering |
2021 |
Low salinity water flooding - Effect of different ions on dolomite rock for wettability alteration |
| Romy Agrawal |
MPE19004 |
Dr Amit Saxena |
Petroleum Engineering and Geoengineering |
2021 |
Application of Artificial Intelligence techniques in litho-facies prediction using Real-time drilling data |
| Vishal Dhar |
MPE19006 |
Dr Shivanjali Sharma |
Petroleum Engineering and Geoengineering |
2021 |
Capillary Suction Timer as a tool for evaluating the performance of different shale inhibitors used in drilling mud |
| Anjanay Pandey |
MPE19001 |
Dr Tushar Sharma |
Petroleum Engineering and Geoengineering |
2021 |
Synthesis of CO2 foams of nonionic surfactant and natural polymer for effective carbon utilization in subsurface applications. |
| Vikram Kumar |
MPE19005 |
Dr Satish Kumar Sinha |
Petroleum Engineering and Geoengineering |
2021 |
Machine Learning Approach for Vertical Permeability Prediction and Permeability Anisotropy of Hugin Sandstone Formation (Volve Field) |
| Ayush Yadav |
MPE18001 |
Dr U D Dwivedi |
Petroleum Engineering and Geoengineering |
2020 |
Optimization of ROP using Response Surface Methodology |
| Dilraj Kaur |
MChE18001 |
Dr Milan Kumar |
Chemical Engineering and Biochemical Engineering |
2020 |
Electrochemical analysis of vanadium solutions, characterization of vanadium uptake and prevention of water loss in nafion |
| Mata Mani Tripathi |
MChE18003 |
Dr Rakesh Kumar |
Chemical Engineering and Biochemical Engineering |
2020 |
Biodiesel production using deep eutectic solvents and solid acid based catalyst |
| Manas Dwivedi |
MChE18004 |
Dr M S Balathanigaimani |
Chemical Engineering and Biochemical Engineering |
2020 |
Hydrophobic deep eutectic solvent based environmental applications |
| Vikrant Sen |
MChE18005 |
Dr M S Balathanigaimani |
Chemical Engineering and Biochemical Engineering |
2020 |
Deep eutectic solvent based gas storage |
| Girjesh |
MPE16002 |
Dr Satish Kumar Sinha |
Petroleum Engineering |
2018 |
Casing Seat Designing using Managed Pressure Technique for KG Basin - A Case Study |
| Himanshu Kesarwani |
MPE16003 |
Dr Shivanjali Sharma |
Petroleum Engineering |
2018 |
Formulation of Jatropha Oil based Mud and Comparison with Diesel Oil based Mud |
| Komal Shukla |
MChE16001 |
Dr Rakesh Kumar |
Chemical Engineering |
2018 |
Simulation study for separation of aromatic hydrocarbons from naphtha |
| Uttam Kumar |
MChE16002 |
Dr Koushik G Biswas |
Chemical Engineering |
2018 |
Liquid-liquid flow through home built microreactors: Flow pattern and mass transfer |
| Santdeep Kumar |
MPE16005 |
Dr Alok Kumar Singh |
Petroleum Engineering |
2018 |
Use of Cow Dung Particles as an Environmental Friendly Cement Fluid Loss Additive |
| Krishna Raghav Chaturvedi |
MPE15001 |
Dr Alok Kumar Singh |
Petroleum Engineering |
2017 |
Mitigating risks while drilling through offshore gas hydrate reserves |
| Nitu Kumari Thakur |
MPE15002 |
Dr Shivanjali Sharma |
Petroleum Engineering |
2017 |
Effect of Bismuth Ferrite on rheological and fluid loss properties of WBM |
| Prakshi Varshney |
MPE15006 |
Dr Dinesh C Tewari |
Petroleum Engineering |
2017 |
Effect of Injection Water Salinity on Oil Recovery-A Laboratory Investigation on Berea Sandstone |
| Rishiraj Goswami |
MPE15003 |
Dr Tushar Sharma |
Petroleum Engineering |
2017 |
Impact of Reservoir Brine Salinity on the performance of Micellar Flooding for Brownfield Reservoir |
| Vikas Sharma |
MPE15005 |
Dr Shivanjali Sharma |
Petroleum Engineering |
2017 |
Designing of Drilling Fluids, Lost Circulation Remedies & Cement Slurry for high temperature, high-pressure wells in India |
| Abhay Singh Yadav |
MPE14006 |
Dr Alok Kumar Singh |
Petroleum Engineering |
2016 |
Analytical Model for Multi-Fractured Horizontal Well in Unconventional Reservoirs |
| Bijoy Kumar Purohit |
MChE14-001 |
Dr V S Sistla |
Chemical Engineering |
2016 |
Heterogeneous Crystallization of Inorganic salt hydrates in polymeric foam for thermal energy storage application |
| Mohd. Sameer |
MPE14004 |
Dr Tushar Sharma |
Petroleum Engineering |
2016 |
Nanofluid of an Oilfield Polymer Polymer Polyacrylamide (PAM): Effects of Concentration, Dispersion Stability and Nanoparticles Combination |
| Ravi Shankar |
MPE14001 |
Dr Shivanjali Sharma |
Petroleum Engineering |
2016 |
Effect of local organic polymer and zinc titanate nano particle on properties of water based drilling mud and development of new rheological model to describe drilling mud behaviour |
| Ravi Shankar Kumar |
MPE14002 |
Dr U D Dwivedi |
Petroleum Engineering |
2016 |
Modeling and Simulation of SVR Based Intelligent Estimators for Reservoir Characterization |
| Swati Gupta |
MChE14002 |
Dr Milan Kumar |
Chemical Engineering |
2016 |
Parametric study of performance of vanadium redox flow battery |
| Boddapati Satish Babu |
MPE13001 |
Dr U S Prasad |
Petroleum Engineering |
2015 |
Simulation and Evaluation of Polymer Flooding in Enchanced Oil Recovery |
| Divyam Jha |
MChE13001 |
Dr M S Balathanigaimani |
Chemical Engineering |
2015 |
Adsorptive and Extractive desulfurization of Dibenzothiophene from |
| Mohd. Belal Haider |
MChE13002 |
Dr Rakesh Kumar |
Chemical Engineering |
2015 |
Experiental Study of Ionic Liquid Blends for CO2 capture |
| Ruchika Gupta |
MChE13003 |
Dr Amit Ranjan |
Chemical Engineering |
2015 |
Fabrication and Characterization of polymer fatty acid composite nanofibrous mats for thermal energy storage applications |
| Saurav Sengupta |
MPE13002 |
Dr C K Jain |
Petroleum Engineering |
2015 |
Well Planning and Design of a Directional Well using Graphical-Manual Aproach |
| Saurabh Tewari |
MPE13003 |
Dr U D Dwivedi |
Petroleum Engineering |
2015 |
Detection of Drill Pipe Stuck up using Machine Learning and Kernel PCA |
| Ashutosh Shankar |
MPE12001 |
Dr U S Prasad |
Petroleum Engineering |
2014 |
Sensitivity Analysis of Steam Assisted Gravity Method for a Heavy Oil Reservoir |
| Neelam Choubey |
MPE12008 |
Dr S K Mishra |
Petroleum Engineering |
2014 |
Pressure Transient Analysis of Dual Porosity Reservoir System |
| Vishnu C Nair |
MPE12010 |
Dr U S Prasad |
Petroleum Engineering |
2014 |
Modelling, Simulation and Sensitivity Study of In-Situ Combustion Process |
| Amit Kumar Singh |
MPE11001 |
Dr Satish Kumar Sinha |
Petroleum Engineering |
2013 |
Static characterization of oil sand reservoir - An integrated multidisciplinary workflow |
| Ajendra Singh |
MPE11002 |
Dr Satish Kumar Sinha |
Petroleum Engineering |
2013 |
Reservoir Characterization & Modeling of a Cambay field – An Integrated Approach |
| Manish Singh |
MPE11003 |
Dr C K Jain |
Petroleum Engineering |
2013 |
Development of Drilling Fluid for HPHT Wells |
| Abhishek Kumar |
MPE10001 |
Dr Satish Kumar Sinha |
Petroleum Engineering |
2012 |
Shale gas reservoir characterization and resource estimation |
| Devanshu Kumar |
MPE10004 |
Dr C K Jain |
Petroleum Engineering |
2012 |
Directional Well Design for Coalbed-Methane |
| Nilesh Kumar Jha |
MPE10003 |
Dr U S Prasad |
Petroleum Engineering |
2012 |
PVT/ Thermodynamic Characterization of Crude Oil Samples from a field of Ahmedabad Asset for CO2 EOR studies |
| Swetabh Gautam |
MPE10002 |
Dr U S Prasad |
Petroleum Engineering |
2012 |
Static Modeling of a field using Geology & Geophysics to develop a model |
| Bhaskar Jyoti Deori |
MPE09001 |
Dr U S Prasad |
Petroleum Engineering |
2011 |
Well Test Analysis and Interpretation of Selected Problematic Oil and Gas Wells in the Upper Assam Basin |
| Gaurav Bajpai |
MPE09002 |
Dr U S Prasad |
Petroleum Engineering |
2011 |
Modeling and Simulation of Multiphase Flow in Well Conduits for Analysis and Design of Suitable Artifical Lift System |
| Mayank Srivastava |
MPE09003 |
Dr U S Prasad |
Petroleum Engineering |
2011 |
A Systematic Approach for Coal Bed Methane Field Development |
| Sandeep Kumar Verma |
MPE09004 |
Dr U S Prasad |
Petroleum Engineering |
2011 |
Characterization of Polymer Gel System for Water Shut-off |
| Praveen Srivastava |
MPE08001 |
Dr U S Prasad |
Petroleum Engineering |
2010 |
Development of Exploitation Strategy for Water Drive Gas Reservoir |
| Prateek Pathak |
MPE08002 |
Dr U S Prasad |
Petroleum Engineering |
2010 |
Mechanistic Modeling, Design and Optimization of Chemical Flooding Process |
| Pawan Saini |
MPE08003 |
Dr U S Prasad |
Petroleum Engineering |
2010 |
Design and Optimization of Hydraulic Fracturing Treatment for Oil and Gas Wells of Western Onshore of India |